In this work, the effects of finite size on the determination of the three-phase coexistence temperature (T-3) of the carbon dioxide (CO2) hydrate have been studied by molecular dynamic simulations and using the direct coexistence technique. According to this technique, the three phases involved (hydrate-aqueous solution-liquid CO2) are placed together in the same simulation box. By varying the number of molecules of each phase, it is possible to analyze the effect of simulation size and stoichiometry on the T-3 determination. In this work, we have determined the T-3 value at 8 different pressures (from 100 to 6000 bar) and using 6 different simulation boxes with different numbers of molecules and sizes. In two of these configurations, the ratio of the number of water and CO2 molecules in the aqueous solution and the liquid CO2 phase is the same as in the hydrate (stoichiometric configuration). In both stoichiometric configurations, the formation of a liquid drop of CO2 in the aqueous phase is observed. This drop, which has a cylindrical geometry, increases the amount of CO2 available in the aqueous solution and can in some cases lead to the crystallization of the hydrate at temperatures above T-3, overestimating the T-3 value obtained from direct coexistence simulations. The simulation results obtained for the CO2 hydrate confirm the sensitivity of T-3 depending on the size and composition of the system, explaining the discrepancies observed in the original work by M & iacute;guez et al. [J. Chem Phys. 142, 124505 (2015)]. Non-stoichiometric configurations with larger unit cells show a convergence of T-3 values, suggesting that finite-size effects for these system sizes, regardless of drop formation, can be safely neglected. The results obtained in this work highlight that the choice of a correct initial configuration is essential to accurately estimate the three-phase coexistence temperature of hydrates by direct coexistence simulations.
In this work, the effects of finite size on the determination of the three-phase coexistence temperature (T-3) of the carbon dioxide (CO2) hydrate have been studied by molecular dynamic simulations and using the direct coexistence technique. According to this technique, the three phases involved (hydrate-aqueous solution-liquid CO2) are placed together in the same simulation box. By varying the number of molecules of each phase, it is possible to analyze the effect of simulation size and stoichiometry on the T-3 determination. In this work, we have determined the T-3 value at 8 different pressures (from 100 to 6000 bar) and using 6 different simulation boxes with different numbers of molecules and sizes. In two of these configurations, the ratio of the number of water and CO2 molecules in the aqueous solution and the liquid CO2 phase is the same as in the hydrate (stoichiometric configuration). In both stoichiometric configurations, the formation of a liquid drop of CO2 in the aqueous phase is observed. This drop, which has a cylindrical geometry, increases the amount of CO2 available in the aqueous solution and can in some cases lead to the crystallization of the hydrate at temperatures above T-3, overestimating the T-3 value obtained from direct coexistence simulations. The simulation results obtained for the CO2 hydrate confirm the sensitivity of T-3 depending on the size and composition of the system, explaining the discrepancies observed in the original work by M & iacute;guez et al. [J. Chem Phys. 142, 124505 (2015)]. Non-stoichiometric configurations with larger unit cells show a convergence of T-3 values, suggesting that finite-size effects for these system sizes, regardless of drop formation, can be safely neglected. The results obtained in this work highlight that the choice of a correct initial configuration is essential to accurately estimate the three-phase coexistence temperature of hydrates by direct coexistence simulations. Read More


