This study addresses the development of a new composite material made under circular economy criteria using natural and recycled resources. Recycled expanded polystyrene is innovatively integrated into the matrix of gypsum-based materials reinforced with fibers. This approach has progressively reduced the consumption of raw materials up to 18.2%, resulting in a reduction of 31.7% in density. This results in a reduction of 47.2% thermal conductivity compared to conventional gypsum and an improvement in the energy efficiency of the construction systems, increasing their thermal resistance by up to 21.1%. Additionally, the mechanical characterization results comply with the minimum regulated requirements. Physico-chemical characterization and material’s microstructure analysis were also conducted. Finally, an assessment of the material’s behavior under fire conditions is included, analyzing the hazard emissions released. This study contributes to the development of new sustainable construction materials to produce more energy-efficient prefabricated products.
This study addresses the development of a new composite material made under circular economy criteria using natural and recycled resources. Recycled expanded polystyrene is innovatively integrated into the matrix of gypsum-based materials reinforced with fibers. This approach has progressively reduced the consumption of raw materials up to 18.2%, resulting in a reduction of 31.7% in density. This results in a reduction of 47.2% thermal conductivity compared to conventional gypsum and an improvement in the energy efficiency of the construction systems, increasing their thermal resistance by up to 21.1%. Additionally, the mechanical characterization results comply with the minimum regulated requirements. Physico-chemical characterization and material’s microstructure analysis were also conducted. Finally, an assessment of the material’s behavior under fire conditions is included, analyzing the hazard emissions released. This study contributes to the development of new sustainable construction materials to produce more energy-efficient prefabricated products. Read More
Related posts:
Towards the design of new circular composites for lightweight boards in building: analysis and environmental performance
Dissolved recycled expanded polystyrene as partial replacement in plaster composites
New lightened plaster material with dissolved recycled expanded polystyrene and end-of-life tyres fibres for building prefabricated industry
Upcycling automobile end-of-life tires for development and characterization of circular plasterboards
Upcycling EPS waste and mineral wool to produce new lightweight gypsum composites with improved thermal performance
Optimizing Masonry Mortar: Experimental Insights into Physico-Mechanical Properties Using Recycled Aggregates and Natural Fibers